Technics SA-C600S Basic Owner's Manual

12
Network settings
(12)
■
Preparation
If you install the Google Home app on your
smartphone/tablet, you can set up a connection
using the application.
• When using Chromecast-enabled apps to play
music on this unit, set up a connection using
the Google Home app.
• Make sure that the Wi-Fi function is activated
on your smartphones/tablet.
1 Install the Google Home app on your
smartphone/tablet.
• To download the Google Home app, visit:
https://www.google.com/cast/setup/
2 Connect your smartphone/tablet to
the same network as this unit before
setting.
• Make sure that the network is connected to
the Internet.
You can stream online music services or music files from your smartphone/tablet to
this unit. To use these features, this system must join the same internet-connected
network as the compatible device.
This unit can be connected to a router using a LAN cable or built-in Wi-Fi
®
.
For a stable connection to the network, a wired LAN connection is recommended.
Note
• If you try to change the network settings immediately after turning on this unit, it may take some time until
the network setup screen is displayed.
• If “Firmware update is available” is displayed after the network connection is set up, the firmware for this
unit is available.
- For the update information, refer to the following website.
www.technics.com/support/firmware/
Note
• For using stream audio via AirPlay, you do not have to set up using the Google Home app. You can use the
Apple Home app to add this unit to the network. Adding this unit to the network via the Apple Home app
will also allow the user to stream audio using Siri.

Technics SA-C600S Specifications

General

Brand	Technics
Model	SA-C600S
Category	Car Receiver
Language	English