Technics SA-GX130D User Manual

0 Speaker selectors (SPEAKERS)
These selectors are used to select the speaker system(s) {A
and/or B).
0 Muting indicator (MUTING)
This indicator will illuminate when the muting button (on the
remote control transmitter) is pressed.
0 Tape-monitor/VCR 2 button
(TAPE MONITOR/VCR 2)
Press this button to listen to a tape or second VCR con¬
nected to the "TAPE/VCR 2” terminals.
To listen to some other source, press this button once again
(so that the indicator is switched OFF).
0 Loudness indicator (LOUDNESS)
This indicator will illuminate when the loudness button is
pressed.
0
Tape indicator (
TAPE
)
This indicator will illuminate when the tape-monitor/VCR 2
button is pressed.
0 Volume control (VOLUME)
® Loudness button (LOUDNESS)
Set to the “ON” position (the loudness indicator will il¬
luminate); when listening to music at low volume. Auditory
perception of sound in the low frequency range falls off at
low volume, but when the switch is in this position, this defi¬
ciency is compensated for, so that the full impact of tha
musical performance can be enjoyed.
0 Balance control (BALANCE)
0 Tone controls (BASS, TREBLE)
The bass control is used to adjust the low-frequency sound
range, and the treble control Is used to adjust the high-fre¬
quency sound range.
0 Headphones Jack (PHONES)
0 Input selector buttons
These buttons are used to select the sound source to be
heard, such as a disc, radio broadcasts, etc. The selected
sound source is shown on the input selector/frequency
display.
The "PHONO" input selector has two functions: when press¬
ed momentarily it selects "PHONO". When pressed and held
for about 4 seconds, it de-activates the muting function.
11

Technics SA-GX130D Specifications

General

Brand	Technics
Model	SA-GX130D
Category	Stereo Receiver
Language	English