Technics SA-GX505 User Manual

Front
Panel
Controls
and
Functions
is an 2 Se
SES ee
Tuner
section
ae
®
Power “ () STANDBY/ON” switch
(POWER, <b STANDBYION)
This
switch
switches
ON
and
OFF
the
secondary
circuit
power
only.
The
unit
is
in
the
“standby”
condition
when
this
switch
is
set
to
the
&
STANDBY
position.
Regardless
of
the
switch
setting,
the
primary
circuit
is
always
“live”
as
long
as
the
power
cord
is
connected
to
an
electrical
outlet.
Remote-contro! signal receptor
(REMOTE SENSOR)
Receives the signals from the remote-control transmitter.
“STANDBY” indicator (STANDBY)
This
indicator
illuminates
when
the
“STANDBY”
mode
is
set
by
the
main
unit
or
the
remote
control
transmitter.
Preset-tuning buttons (1—0)
(30 CHANNEL RANDOM PRESET TUNING)
These buttons are used to preset broadcast frequencies into
the memory of this unit and to recall the desired preset sta-
tions. (Refer to pages 17-18.)
FM mode selector (FM MODE)
This unit automatically switches to the stereo mode when an
FM stereo broadcast is received. This selector is used to
select the mode (stereo or monaural) of FM broadcast
signals.
Memory scan button (MEMORY SCAN)
This button is used to locate a desired broadcast’ station;
each broadcast station is selected for about 3 seconds.
Memory button (MEMORY)
This button is used when presetting broadcast station
frequencies into memory. (Refer to pages 16-17.)
Tuning control (TUNING)
This control is used to select an FM or AM broadcast.
When turning the control to the left, the frequency changes
downward. When turning the control to the right, the frequen-
cy changes upward.
Band selectors (FM, LW, MW)
FM: Press this button to listen to an FM broadcast.
LW: Press this button to listen to an LW broadcast.
MW: Press this button to listen to an MW broadcast.
ALLOCATION: When the MW button is pressed for about 4
seconds, the MW frequency step will change to 10 kHz per
step. (This step is set to 9 kHz before shipment.) In order to
return to the original frequency indication, press this button
for about 4 seconds again.
Tuning-mode selector/indicator
(TUNING MODE)
Each time this selector is pressed, the selection changes, in
sequence, to “AUTO”, “MANUAL” and “LOCK”.
AUTO:
In this position, broadcast channels are automatically
selected when the tuning control is momentarily turned to
the left or right to start the frequency changing.
MANUAL:
In this position, the tuning control can be used to locate the
desired channei manually.
The frequency changes only as the tuning control is turned
to the right to left.
LOCK:
In this position, the broadcast channel presently being heard
is locked in, and other broadcast stations cannot be tuned to,
even if the tuning control is turned.

Technics SA-GX505 Specifications

General

Brand	Technics
Model	SA-GX505
Category	Stereo Receiver
Language	English