Technics SA-GX670 Operating Instructions

14
POWER TAPE/DCC [MONITOR VOLUME
¢ Before operation, set VOLUME to the “0” position.
«When viewing a video, turn on the power supply for the TV and
set the TV to video mode.
POWER Press POWER to switch on [+ Te\\[--] Press to select the desired
the power. source.
VCR 1: To watch video tapes (VCR 1)
VCR 2: To watch video tapes (VCR 2)
TAPE/DCC: To listen to tape or
digital compact
cassette (DCC)
The tape monitor in-
silat Lens tatacslse RG a usa vse olsen nzd he of wnfave actual eaghuate es dloea taza dicator will appear.
Sree Press A and/or B to select ____ See below.)
the speaker system(s) to be CD: To listen to compact discs
used TUNER: To listen to radio broad-
. . casts
A and B refer to the speaker terminals PHONO: To listen to phono discs
at the rear of the unit.
Start the desired source.
(Refer to the appropriate operating in-
structions for details.)
lluminates
If the button is pressed once more, the
indicator will switch off and no sound
will be heard from the speakers. 5/ cc
volume Turn VOLUME to adjust the
7 oN volume level.
After listening Is finished
Be sure to reduce the volume level, and switch the power to the
standby condition by pressing POWER.
When tape monitor indicator illuminates or is Iliuminates or is flashing
flashing (approx. 3 seconds)
This indicates that the tape monitor function of this unit is ON. ” Aan. GAPE MONITOR) eo
To listen to sources other than a tape or DCC, be sure to turn off SPEAKERS j
the
indicator
by
pressing
TAPE/DCC
[MONITOR].
ao
m

Technics SA-GX670 Specifications

General

Brand	Technics
Model	SA-GX670
Category	Receiver
Language	English