Technics SA-GX670 Operating Instructions

PROGRAM cp-+10
©) Cr
PPLAY e) MIPAUSE tea SKIP ppt
DECK 1/2
CO
REMOTE CONTROL TRANSMITTER
AUDIO
RAK-SA704XH
Operating
the
receiver
(SA-GX670)
Basic operations
To turn the unit
ON/OFF
To turn the tape monitor
function ON/OFF
To select an input
source
To turn the Dolby Pro
Logic SURROUND mode
ON/OFF
To turn the Dolby Pro
Logic 3 STEREO mode
ON/OFF
To adjust the output
level of the rear
speakers
To adjust the output
level of the center
speaker
To output a test signal
To mute the sound level
To adjust the volume
level
Once the unit has been set to ON, it can be
turned ON and OFF simply by pressing
POWER. (See below.)
To listen. to sources other than
a tape or DCC, be sure to turn
ee off the tape monitor indicator
on the main unit.
SURROUND
Press once more to stop a test
TEST} ..
signal.
Press once more to return to
the original volume.
VOLUME +
After carrying out the operation on pages 6—7 for turning the TV or VCR ON or
OFF, always press TUNER before pressing POWER when turning the receiver
ON and OFF.
To listen to radio broadcasts
1 2 3 4 5
@ @ @ @ @
6 > & € 9
@ © @& @
Specify the preset channel
using the numeric button(s).
(Example: Channel 12)
1 2
e——>
(Within 2 sec.)

Technics SA-GX670 Specifications

General

Brand	Technics
Model	SA-GX670
Category	Receiver
Language	English