Technics SC-C70MK2 Basic Operating Instructions

13
Wired LAN connection
Broadband router, etc.
LAN cable
(not supplied)
1 Disconnect the AC mains lead.
2 Connect this unit to a broadband
router, etc. using a LAN cable.
3 Connect the AC mains lead to this
unit, and press [
]. ( 11)
• When the connection is established,
“
” is displayed.
4 Press [>SELECT<] to select
“Chromecast built-in”.
5 Start the “Google Home” app and
follow the on-screen instructions to
set up a connection. ( 14)
Note
• While the AC mains lead is disconnected, the
LAN cable must be connected or disconnected.
• Use category 7 or above straight LAN cables
(STP) when connecting to peripheral devices.
• Inserting any cable other than a LAN cable in
the LAN port can damage the unit.
• When a LAN cable is connected, the Wi-Fi
function may be disabled.
Wireless LAN connection
■
Preparation
Disconnect the AC mains lead.
Disconnect the LAN cable.
Place this unit as close to the wireless router
as possible.
Connect the AC mains lead to this unit. ( 11)
Note
• The setting will be cancelled after the set time
limit. In that case, try the setting again.
• To cancel this setting in the middle, press [
]
or turn the unit to standby mode.
• When the connection is established, “
” is
displayed. ( 14)
Network setting for the first time
using the “Google Home” app
1 Press [ ] to turn this unit on.
• “Wi-Fi Setup” is displayed.
2 Press [ ], [ ] to select “Yes” and
then press [OK].
3 Start the “Google Home” app and
follow the on-screen instructions.
( 14)
Note
• This unit will be displayed as “Technics-SC-
C70MK2-
****
” if the device name is not set.
(“
****
” stands for characters unique to each
set.)
• You can check your network information (SSID,
MAC address and IP address) from the “Google
Home” app or “Technics Audio Center” app.
• Some items on the “Google Home” app are
irrelevant to this unit.
• When this unit is switched to standby mode
and turned on before the Wi-Fi setting is
complete, “Wi-Fi Setup” is displayed. Set “Wi-Fi
Menu” to “Off” to turn off the display.

Technics SC-C70MK2 Specifications

General

Type	Home audio mini system
Product color	Black
Optical disc player	Yes
Number of optical discs	1 discs
Card reader integrated	-
Audio formats supported	AIFF, ALAC, DSD, FLAC, MP3, WAV
Digital audio optical in	1
Supported radio bands	DAB, FM
Subwoofer type	Active subwoofer
RMS rated power	30 W
Woofer diameter	80 mm
Tweeter diameter	20 mm
Number of speakers	2

Weight and Dimensions

Depth	280 mm
Width	450 mm
Height	143 mm
Weight	8000 g