Technics SL-1200GR2 User Manual

START - STOP
ピピ フブ
ヘベ
ɿ
ɿ
ɿ
ヌプハフ
チチピハピ
チチパ
ノ
チ
ピハピ
テ
ヱリヵヤラチモュル
ンユヴユヵ
j
2
24
This unit is equipped with a function to turn off the strobe light while playing a record at a constant
speed or stopped. The strobe light off function is “Disabled” by factory setting. That is, the strobe
light will always be lit while the unit is turned on.


To “Enable” / “Disable” the strobe light off function

Turn [ON/OFF (power)] to turn the unit on.

With the turntable stopped, long press (approx. three seconds) the pitch range select button.

The function toggles between “Enabled” and “Disabled” each time the button is long pressed.

Check the strobe light.
“Enabled”: The strobe light turns off.
“Disabled”: The strobe light lights up.

The setting cannot be changed while the turntable is rotating.

The setting is remembered. The next time the power is turned on, the setting when the power
was last turned off applies.


Operation of the strobe light off function

The operation of the strobe light off function when it is “Enabled” is as follows:
•
The strobe light comes on after the turntable starts rotating and remains lit until the turntable
reaches constant speed.
The strobe light turns off when the rotation is stable for a while after reaching constant speed.
•
The strobe light comes on if the rotation speed temporarily deviates from the constant speed
due to an external load and the like.
The strobe light turns off when the rotation speed stabilizes.

When the strobe light off function is “Disabled”, the strobe light is always lit while the unit is
turned on.
ON/OFF (power)
Strobe light
Pitch range select button
Strobe light off function
SL-1200GR2EBTQBM0908.indd25SL-1200GR2EBTQBM0908.indd25 2023/06/3013:10:452023/06/3013:10:45

Technics SL-1200GR2 Specifications

General

Brand	Technics
Model	SL-1200GR2
Category	Turntable
Language	English