Need help?Do you have a question about the Technics SL-D303 and is the answer not in the manual?
General| Motor | DC servo motor |
|---|---|
| Drive System | Direct Drive |
| Wow and Flutter | 0.025% WRMS |
| Signal-to-Noise Ratio | 78 dB |
| Effective Length | 230 mm |
| Overhang | 15 mm |
| Speeds | 33 1/3, 45 rpm |
| Platter | Aluminum die-cast |
| Tonearm Type | S-shaped |
| Tonearm | Static balance type |
| Dimensions | 430 x 375mm |
Identifies key external parts of the turntable system.
Lists all components included with the turntable unit.
Step-by-step guide to assemble the turntable unit components.
Instructions for placing the turntable platter onto the center spindle.
Guide for inserting the headshell plug into the tonearm.
Steps to fit the counterweight onto the rear end of the tonearm.
Procedure for achieving horizontal zero balance and setting tracking force.
Guidance on setting the anti-skating control to match stylus pressure.
Instructions on how to lower the dust cover into its hinge slots.
Recommendations for stable, vibration-free placement away from potential interference.
How to connect audio output jacks and the AC power plug.
Details on connecting turntable output to amplifier or receiver.
Instructions for connecting the unit to a power source.
Guide to manual and automatic playback modes.
Step-by-step instructions for playing records manually.
How to initiate automatic record start and play.
Instructions on how to engage and stop repeat playback mode.
Procedures for stopping the turntable and temporarily interrupting playback.
How to adjust the arm-lift height for optimal stylus clearance.
Procedure for setting the tonearm's automatic start and return points.
Guide to adjusting turntable rotational speed using the pitch control.
Steps for replacing the diamond stylus assembly.
Instructions for mounting a cartridge and setting the correct overhang.
Information on compatible cartridge weights and use of auxiliary weights.
Tips on cleaning, handling, and maintaining the turntable.
Guidance on packing the unit for transport or shipping.
Instructions for applying oil to the motor shaft.
Advice on playing non-standard or special record types.
Essential safety precautions to prevent hazards and ensure proper use.
Overall power, dimensions, and weight of the turntable.
Details on the turntable's drive system, speeds, and rumble.
Specifications for the tonearm and phono cartridge.
To Next Page
