Technics sl-mc410 User Manual

Operations
Direct programming
If, while listening to a certain track, you decide that you want to
add that track to your program, you can with direct programming.
(While the track you want to program is plaving]
Press DIRECT.
DIRECT
The current track will be added to the tail end of the program.
When you make a program as explained under "Program play",
and then perform the above procedure without clearing the
program first, the selected track is added to the end of the program.
• You cannot add to the program if already full, that is, if already 32
selections have been programmed. If you press DIRECT in such
case, the message "PGM FULL" will appear on the display.
Therefore, direct programming is possible only when 31 or less
tracks have been programmed.
• During program play, the DIRECT button does not respond to
touch.
PROGRAM
To listen to programmed tracks El
[In the stop mode]
Press PROGRAM and check “PROGRAM” appears on
the display, then press ^.
The program will start from the first track.
PROGRAM
To check programmed contents.
(See page 17.)
To clear a single Item from the program,
(See page 17.)
To clear all programmed contents.
[In the stop mode]
Press SI.

Technics sl-mc410 Specifications

General

Brand	Technics
Model	sl-mc410
Category	CD Player
Language	English