Technics sl-pd887 Operating Instructions

Using the remote control
transmitterl
SL PD887 only
To confirm the programmed contents
RECALL
Press RECALL.
Each time you press RECALL, the display
shows the programmed disc and track number
in the sequence you have entered.
Jr'
PQM
II
1 _'TBJCIl Mo,
1
Programrr
track
led Progr
order
ammed
To clear a single item of the programmed
contents
CLEAR
Press CLEAR.
Each time you press CLEAR, you will cancel
last entry in the order you have entered.
To clear an entry in the middie of the program
sequence, press RECALL repeatedly until the
display shows the selection to be cleared, and
then press CLEAR within three seconds after
the last press.
All of the tracks will be played one time each in random order.
There are two types of random play as described below.
RANDOM
MODE
One disc random play
The changer will play all tracks on the current disc in a random
order. Then it will choose a new disc randomly, excluding the
discs already played, and play all tracks on that disc in a random
order.
RANDOM
MODE
[In the stop or play mode]
Press RANDOM MODE so that the
“1 DISC RND” indicator illumi¬
nates.
Each time the button is pressed, the display
will change in the following order: 1 DISC RND
— FULL RND ^ (off).
Illuminates
Full random play _
Each track to be played back is selected randomly from all of the
tracks on all of the discs, excluding the tracks that have already
been played.
RANDOM
MODE
[In the stop or play mode]
Press RANDOM MODE so that the
“FULL RND” indicator Illuminates.
Each time the button is pressed, the display
will change in the following order: 1 DISC RND
— FULL RND — (off).
The changer will stop automatically when all the tracks on all
discs have been played once.
To cancel random play mode
10
Press ■ .
The "1 DISC (or FULL) RND" indicator will go
out.

Technics sl-pd887 Specifications

General

Brand	Technics
Model	sl-pd887
Category	CD Player
Language	English