GB 3
There are 8 languages, English, German, French, Spanish, Italian, Dutch, Polish and Czech, for
day-of-week. The languages and their selected abbreviations for each day of the week are shown in the
following table.
Note:
(1) All Setting mode will automatically exit in around 15 seconds without any adjustment
(2) For Time Zone: If you receive no RC-DCF frequency signal, the time zone should be set to 00. Time Zone
is used in countries which can received the DCF frequency signal but the time zone is different from
German Time ( i.e. GMT+1).
(3) If the temperature is out of the measurable range, LL.L ( beyond the minimum temperature) or HH.H
(beyond the maximum temperature) will be shown on the LCD.
(4) 12/24 time format is used for alarm time
4.3 Dual Alarm Setting:
Press “ AL SET” button (B2), time of alarm 1 flashes, press “▲” (B4) or “▼” (B5) button to adjust the
alarm time. Press “AL SET” button (B2) to confirm the setting and move to the setting of alarm 2, press
“▲” (B4) or “▼” (B5) button to adjust the time for alarm 2, press “AL SET” button (B2) to confirm and
exit the setting
4.4.1 Alarm function:
Slide “AL 1” or “AL 2” switch to “ON” to activate the ALARM 1 or ALARM 2 function, alarm time and
alarm icon“ ” appear on the display. Slide “AL 1” or “AL 2” switch to “OFF” to deactivate alarm
function. Alarm icon “ ” disappears from the display.
4.4.2 Snooze Alarm Function:
When alarm sounds, except “SNOOZE” button, press any buttons to stop the alarm. Otherwise, the
alarm signal sounds for about 2 minutes, then stops automatically
Press “SNOOZE/LIGHT” (B1) button when alarm alerts. “ ” flashes on the LCD. The alarm snoozes for
To Next Page
Loading...
Need help?
General
