SET key (Setting):
• To enter the set mode for the following functions: LCD contrast, Time zone, Time Reception ON/OFF, 12/24
hour display, Manual time, Year, Date, snooze time duration, °C/°F, and Weather forecasting icon sensitivity
settings.
Note: The year can be displayed in the set mode (not displayed in normal mode)
• To stop the alarm
IN key (Indoor)
• To toggle between the current/ minimum / maximum indoor temperature and humidity
• To press for over 3 seconds to reset the indoor maximum and minimum temperature and humidity records
(will reset all records to current level)
Note: the Time/date information is only available for MIN/MAX temperature data, and will be changed to default
time after the reset operation
• To change LCD contrast, time zone, Time Reception ON/OFF, 12/24 hour display, hour, year, month, day,
snooze time duration, °C/°F and weather forecasting icon sensitivity in setting modes
Note: in 24hr time display mode, the day is set by using the IN key. In 12hr time display mode, the month is set by
using the IN key
• To change alarm hour in alarm setting mode
• To stop the alarm
OUT key (Outdoor)
• To toggle between the current/ minimum/ maximum outdoor temperature and humidity
• Press for around 3 seconds to reset the outdoor maximum and minimum temperature and humidity records
(will reset all records to current level of the relative transmitter being reset- each transmitter’s data must be
reset separately)
Note: the time/date information of MIN/MAX temperature will be reset to default time as well.
• To change minute, day, month units in setting modes
34
To Next Page
Loading...
Need help?
General
