1-17
1-5-3 Notice for install motor
1. Please using oil-seal-motor to avoid the oil from reduction gear flowing into the motor through the motor
shaft.
2. The cable need to be kept dry.
3. Please fixing the wiring cable certainly, to avoid the cable ablating or breaking.
4. The extending length of the shaft shall be enough, otherwise there will be the vibration from motor
operating.
Wrong Example Correct Example
Brake
Encoder
5. Please do not beat the motor when installing or taking it apart. Otherwise the shaft and the encoder of
backside will be damaged.
Attention:
Brake
Encoder
To Next Page
Loading...
Need help?
General
