Tektronix AFG3011 Technical Reference

Performance verification
>100 kHz test setup
1. Connect the arb
itrary function generator to the power meter with a power
head as shown in the following figure.
Figure 10: >1 kHz setup for AC Flatness test
2. Set up the arbitrary function generator using the following steps:
Select me
nu
Setting Operatio
n
Function
Sine Sine (fr
ont)
Frequency 500 kHz
Frequen
cy/Period (front)
Amplitude Units dBm
TopMen
u > Amplitude/Level Menu >
-more- > Units > dB m
Amplit
ude
+4.0dB
m
Amplitude/High (front)
Channel 1 Output On On (front)
3. Set the frequency of the Power Meter to match the frequency setting of the
generator.
4. Verify that the power measurement is within the limits specified in the
following tables, relative to the 1 kHz reference power level.
5. Repeat steps 3 through 4 with the generator set to each of the other
frequencies specified in the following tables.
6. (Two channel models only) Repeat this procedure starting at step 3 of the
1 kHz test setup for the channel 2 output.
A
FG3011 / 3011C
M
easurement
R
ange
Function Amplitude Frequency
(dBm)
(
dB)
Sine
+ 4.0 dBm 1.00 kHz
= Reference
------
Sine
+ 4.0 dB m 500 kHz
Reference ± 0.15
Sine
+ 4.0 dBm 1.00 MHz
Reference ± 0.15
Sine
+ 4.0 dBm 5.00 MHz
Reference ± 0.30
Sine
+ 4.0 dB m 10.00 MHz
Reference ± 0.30
AFG302xB / 302xC Measurement Range
Function Amplitude Frequency
(dBm)
(dB)
Sine
+ 4.0 dBm 1.00 kHz
= Reference
------
AFG3000C and AFG3000 Series Specifications and Performance Verification 57

Tektronix AFG3011 Specifications

General

Brand	Tektronix
Model	AFG3011
Category	Inverter
Language	English