Getting started
Table 4: Standard accessories (cont.)
Description Tektronix part number
No power cord or AC adapter (Option A99)
---
50 Ω BNC cable, double-shielded, 91 cm (36 in)
012-1732-XX
1
These manu
als contain a language overlay for the front panel controls.
Optional accessories
The follo
wing optional accessories are recommended for your instrument:
Table 5: Optional accessories
Description Tektronix part number
50 Ω BNC cable, double-shielded, 250 cm (98 in)
012-1256-XX
GPIB interface cable, double-shielded, 200 cm (79 in)
012-0991-XX
Rackmount kit RM3100
Fuse adapter (BNC-P to BNC-R)
013-0345-XX
0.125 fuse set (contains three fuses)
159-0454-XX
NOTE. To ensure the EMC compliance listed in the Specifications, connect only
high quality shielded cables to this instrument. High quality shielded cables
typically are braid and foil types that have low impedance connection to shielded
connectors at both e nds.
Cl
eaning
Inspect the instrument as often as operating conditions require. To clean the
exterior surface, perform the f ollowing steps:
1. Remove loose dust on the outside of the instrument with a lint-free cloth. Use
care to avoid scratching the d isplay.
2. Use a soft cloth dampened with water to clean the instrument. Use an aqueous
solution of 75% isopropyl alcohol for more efficient cleaning.
CAUTION. To avoid damage to the surface of the instrument, do not use any
abrasive or chemical cleaning agents.
CAUTION. Avoid getting moisture inside the unit during external cleaning. Use
only enough cleaning solution to dampen the cloth or swab.
6 AFG3000 and AFG3000C Series User Manual
To Next Page
Loading...
Need help?
General