Tektronix DAS9100 User Manual

)
)
)
Service Administrative Support
DAS9100 CIRCUIT BOARD PACKAGING
Affected instruments: All DAS Circuit
Boards.
A shipping package is now available in
which DAS circuit boards can be
reliably transported. It's part
number is 004-2181-00. It's
dimensions allow packaging of a
circuit board that is 17" x 7.5" which
is the size of DAS plug in modules.
This package could also accommodate
many MDP and IDD circuit boards.
w2 Issue 13-21
DC5090/DC510 MICROPROCESSOR RESET
CYCLER
serial Numbers Affected: All
The following procedure can be
very useful for cycling
microprocessor based instruments
with intermittent kernal problems.
GPIB instruments that support the
•TEST• command may not always
perform a complete power-on self
test.
From time to time it may be
useful to cycle a uP-based
instrument at a rate much
faster than the fifteen
minutes of a typical cycler.
This set-up is a convenient
way of doing it and requires
only a TGS0l (or other clock)
and a DDS0l.
Connect the trigger output of
the TGS0l through a cable,
terminator, and dual input
coupler to the inputs of the
OD501. Connect the output of
the DO501 without a terminator
through a cable and BNC-to-Ez
Hook adapter to the reset pin
of the uP in the instrument
under test.
-1-
October, 1983 laaue 31
Set the TGS0l to 1 ms and
trigger the DDS0l. The events
delay count switches will now
control the time between
resets from zero to 99 .999
seconds, in 1 ms increments.
w2 Issue 13-16
IDD TOUCH-UP PAINT PART NUMBERS:
OLD/NEW COLORS
Approximately 3 years ago, IDD changed
the colors of their products. This has
caused some confusion in determining
which products have the old colors and
which products have the new colors.
The following are three lists, one
listing the IDD products having the Tek
blue color, the second listing the !DD
products having the old gray/tan colors
and the third listing the products
having the new gray/tan colors.
Included with each list of products are
the correct color names and Tek part
numbers of the 13 oz. cans of spray
touch-up paint for each color.
Tek Blue Colored IDD Products
Tek Blue spray paint p.n. 252-0092-02
Tek 21
Tek 31
603
604A
606
607A
608
620
624
634
Tek Old Gray/Tan IDD Products
TV Gray spray paint p.n. 252-0217- 03
Tek Tan spray paint p .n. 252-0203- 04
(ARTICLE CONTINUED ON THE NEXT PAGE)

Tektronix DAS9100 Specifications

General

Brand	Tektronix
Model	DAS9100
Category	Measuring Instruments
Language	English