Tektronix DPO2014 Programmer's Manual

Commands Listed in Alphabetical Order
Returns
OK is returned i
f the computer at the gateway IP address answers.
NORESPOnsE is returned if the computer at the gateway IP address does not
answer.
INPROGRESS is returned if the ping operation is still executing.
ETHERnet:SUBNETMask
Sets or returns the remote interface subnet mask value.
Group
Ethernet
Syntax
ETHERnet:SUBNETMask <QString>
ETHERnet:SUBNETMask?
Arguments
<QString> is the subnet mask value, enclosed in quotes.
Examples
ETHERNET:SUBNETMASK “255.255.255.0” sets the subnet mask value using
standard IP address notation format.
EVENT? (Query Only)
Returns an event code from the Event Queue that provides information about the
results of the last *ESR? read. EVENT? also removes the returned value from
the Event Queue.
Group
Status and Error
Syntax
EVENT?
Related Commands
ALLEv?, *CLS, DESE, *ESE, *ESR?, EVMsg?, *SRE, *STB?
Examples
EVENT? might return :EVENT 110, showing that there was an error in a
command header. (See page 3-12, Messages.)
2-152 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2014 Specifications

General

Brand	Tektronix
Model	DPO2014
Category	Test Equipment
Language	English