Tektronix DPO2014 Programmer's Manual

Commands Listed in Alphabetical Order
Syntax
TRIGger:A:BUS
:SOUrce {B 1|B2}
TRIGger:A:BUS:SOUrce?
Arguments
B1 specifies the Bus 1 source.
B2 specifies the Bus 2 source.
TRIGger:A:EDGE? (Query Only)
Returns the trigger source, coupling, and slope for the A edge trigger.
Group
Trigger
Syntax
TRIGger:A:EDGE?
Related Commands
TRIGger:A:PULse?, TRIGger:A:LOGIc?
Examples
TRIGGER:A:EDGE? might return :TRIGGER:A:EDGE:SOURCE CH1;COUPLIN G
DC; SLO PE RISE
indicating that the trigger source, coupling, and slope for
the A edge trigger.
TRIGger:A:EDGE:COUPling
Sets or returns the type of coupling for the A edge trigger.
Group
Trigger
Syntax
TRIGger:A:EDGE:COUPling {DC|HFRej|LFRe j|NOISErej}
TRIGger:A:EDGE:COUPling?
Related Commands
TRIGger:A:EDGE:SOUrce, TRIGger:A:EDGE:SLOpe
Arguments
DC specifies DC trigger coupling, which passes all input signals to the trigger
circuitry.
HFRej specifies high-frequency rejection coupling, which attenuates signals
above 50 kHz before passing the signals to the trigger circuitry.
LFRej specifies low-frequency rejection coupling, which attenuates signals below
50 kHz before passing the signals to the trigger circuitry.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-313

Tektronix DPO2014 Specifications

General

Brand	Tektronix
Model	DPO2014
Category	Test Equipment
Language	English