Tektronix DPO2014 Programmer's Manual

Commands Listed in Alphabetical Order
AUXin:PRObe:
DEGAUss (No Query Form)
Starts a degauss/autozero cycle on a TekVPI current probe attached to the A ux In
input. If you send this command to a probe that does not support this function,
it is ignored
Group
Vertical
Syntax
AUXin:PRObe:DEGAUss {EXECute}
Arguments
EXECute starts a probe degauss cycle.
Examples
AUXin:PROBE:DEGAUSS EXECUTE degausses the probe attached to the Aux
In input.
AUXin:PRObe:DEGAUss:STATE? (Query Only)
Returns the state of the probe degauss (NEEDED, RECO MMENDED, PASSED,
FAILED, RUNNING). The command will return PASSED for probes that do not
support degauss operations.
Group
Vertical
Syntax
AUXin:PRObe:DEGAUss:STATE ?
Examples
AUXin:PROBE:DEGAUSS:STATE ? might return:
AUXin:PROBE:DEGAUSS:STATE PASSED indicating that the probe has been
degaussed.
AUXin:PRObe:FORCEDRange
Changes or returns the range on a TekVPI probe attached to the Aux In input.
Group
Vertical
Syntax
AUXin:PRObe:FORCEDRange <NR3>
AUXin:PRObe:FORCEDRange?
2-70 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series O scilloscopes Programmer Manual

Tektronix DPO2014 Specifications

General

Brand	Tektronix
Model	DPO2014
Category	Test Equipment
Language	English