Tektronix DPO2024B Programmer's Manual

Commands Listed in Alphabetical Order
Related Commands
MATH[1]:DEFin
e
Arguments
DUAL sets the math waveform mode to dual waveform math.
FFT sets the math waveform mode to FFT math.
Examples
MATH:TYPE FFT sets the math waveform mode to FFT.
MATH:TYPE FFT;:MATH:DEFINE “FFT( CH1 )” sets the math type to FFT
and displays an FFT waveform of the c hannel 1 waveform, using the current
FFT scale and window settings.
MATH[1]:VERTical:POSition
Sets or returns the vertical position of the currently selected math type.
Group
Math
Syntax
MATH[1]:VERTical:POSition <NR3>
MATH[1]:VERTical:POSition ?
Related Commands
CH<x>:POSition, REF<x>:VERTical:POSition
Arguments
<NR3> is the desired position in divisions from the center graticule.
Examples
MATH1:VERTICAL:POSITION 1.3E+00 positions the Math 1 input signal
1.3 divisions higher than a position of 0.
MATH1:VERTICAL:POSITION? might return : MATH1:VERTICAL:POSITION
-1.3000E+00
indicating that the current position of M ath 1 is 1.3 divisions
below the center graticule.
MATH[1]:VERTical:SCAle
Sets or returns the vertical scale of the currently selected math type.
Group
Math
Syntax
MATH[1]:VERTical:SCAle <NR3>
MATH[1]:VERTical:SCAle?
2-184 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2024B Specifications

General

Brand	Tektronix
Model	DPO2024B
Category	Test Equipment
Language	English