Clear and Sanitize a Non-Functional Instrument
If your instrument is not functioning and you need to clear or sanitize it, proceed
as follows:
Acquisition
board
Remove the Acquisition board and return the product to Tektronix. A new
Acquisition board will be installed, and the instrument will be repaired and
adjusted as necessary.
For removal instructions, refer to the Te ktronix 4000 Series Digital Phosphor
Oscilloscopes Service Manual, part number 071-2137-XX, available on the
Tektroni
x Web site at www.tektronix.com/manuals.
After removal of the Acquisition board, refer to your company’s internal policies
regardi
ng handling or disposal of the board.
CompactFlash Memory
Card
Remove the CompactFlash memory card and return the instrument to Tektronix
for repair.
After removal of the CompactFlash memory card, refer to your company’s
internal policies regarding handling or disposal of the memory card.
USB Flash Drive
Remove the USB flash drive and return the instrument to Te ktronix for repair.
After removal of the USB flash drive, refer to your company’s internal policies
regarding handling or disposal of the flash drive.
Charges
Replacement of any missing hardware will be charged according to the rate at
the time of replacement.
Tektronix 4000 Series Declassification and Security Instructions 7
To Previous Page
Loading...
Need help?
General
