Tektronix MDO3000 Series Demonstration Guide

Spectrum Analyzer – Every MDO3000 ships standard with
a dedicated spectrum analyzer input which provides better
performance than a traditional oscilloscope FFT. The standard
integrated spectrum analyzer input frequency is from 9 kHz to
the bandwidth of the scope and is extendable to 3 GHz with
the MDO3SA option.
Arbitrary Function Generator (Optional) – Choose from 13
predefined standard waveforms like sine, square or ramp,
or replicate virtually any signal with the arbitrary waveform
generation with 128k record length and 250MS/s sample rate.
Even add noise to your waveform to perform margin testing
on your circuits.
Logic Analyzer (Optional) – The MDO3000 provides a 16
digital channel logic analyzer with the MDO3MSO option,
enabling you to look at multiple points in your design at once.
Protocol Analyzer (Optional) – The MDO3000 Series offers a
robust set of tools for debugging serial buses with automatic
trigger, decode, and search for I
2
C, SPI, CAN, LIN, FlexRay,
USB 2.0, RS-232, RS-422, RS-485, UART, USB 2.0, Mil-Std
1553.
Digital Voltmeter (DVM) (Optional) – For fast voltage and
frequency measurements, the optional digital voltmeter
is easy-to-use. The DVM is free when you register your
MDO3000 Series product.
Upgradability – The MDO3000 is completely upgradeable.
Upgrade scope bandwidth and RF input frequency, add
more functionality such as AFG, logic analyzer, and DVM,
or add analysis capability such as serial bus triggering and
decode, power measurement and limit/mask test, whenever
you need it.
www.tektronix.com/mdo3000 5
MDO3000 Series Oscilloscope
Demonstration Guide

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English