Getting Acquainted with the Oscilloscope
Using the Menu Buttons
Use the menu buttons to perform many functions in the oscilloscope.
1. Measure. Push to perform automated measurements on waveforms.
2. Search. Push to search through an acquisition for user-defined events/criteria.
3. Autoset. Push to p erform an automatic setup of oscilloscope settings.
4. Test. Push to a ctivate advanced or application-specific testing features.
5. Acquire. Push to set the acquisition mode and adjust the record length.
6. Trig
ger Menu. Push to specify trigger settings.
7. M. Push to manage the math waveform, including the display or removal of
the
math waveform from the display.
8. R. Push to manage reference waveforms, including the display or removal of
ea
ch reference waveform from the display.
9. B1 or B2. Pushtodefine and display a serial bus if you have the appropriate
ap
plication modules.
Parallel bus support is available on MDO3000 products.
Also, push the B1 or B2 button to display or remove the corresponding bus
from the display.
10. AFG. Push to enable the arbitrary function g enerator.
MDO3000 Installation and Safety Instructions 33
To Next Page
Loading...
Need help?
General
