Tektronix MSO2024B Programmer's Manual

Commands Listed in Alphabetical Order
CURSor:XY:RE
CTangular:Y:DELta? (Query Only)
Returns The cursor Y delta value in rectangular coordinates.
Group
Cursor
Syntax
CURSor:XY:RECTangular:Y:DE Lta?
CURSor:XY:RECTangular:Y:POSITION<x>
Sets or returns the Y rectangular coordinate for c ursor 1 or cursor 2. The cursor
is specified by x.
Group
Cursor
Syntax
CURSor:XY:RECTangular:Y:PO SITION<x> <NR3>
CURSor:XY:RECTangular:Y:PO SITION<x>?
Arguments
<NR3> is the coordinate in volts
.
CURSor:XY:RECTangular:Y:UNIts? (Query Only)
Returns the cursor Y rectangular units.
Group
Cursor
Syntax
CURSor:XY:RECTangular:Y:UN Its?
CURVe
Transfers waveform data to and from the oscilloscope in binary or ASCII format.
Each waveform transferred includes a waveform preamble which contains the
data format, scale, and associated information.
For a nalog waveforms, the CURVe? query transfers data from the oscilloscope.
Thedatasourceisspecified by the DATa:SOUrce command. The first and last
data points are s pecifi ed by the DATa:STARt and DATa:STOP commands.
The oscilloscope returns data from the last acquisition if the source is a channel
waveform that is being previewed. The data does not reflect the acquisition
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-123

Tektronix MSO2024B Specifications

General

Brand	Tektronix
Model	MSO2024B
Category	Test Equipment
Language	English