Tektronix MSO4054 Instructions

Preface
If you have data security concerns, this document helps you to sanitize or remove
memory devices from the Tektronix 4000 Series Digital Phosphor Oscilloscopes.
The 4000 series products have data storage (memory) devices and data output
devices (CompactFlash card, and USB ports). These instructions tell you how
to clear or s
anitize the memory devices, and also tell you how to declassify an
instrument that is not functioning.
Instrumen
t code and calibration settings reside in nonvolatile flash memory.
Instrument setups and reference waveforms may also be stored in flashmemoryor
on CompactFlash and USB drives connected to the instrument.
If you have any questions, contact the Tektronix Technical Support Center at
www.tektronix.com/support.
Products
The fol
lowing Tektronix products a re covered by this document:
DPO4104
DPO4054
DPO4034
DPO4032
MSO4104
MSO
4054
MSO4034
MSO4032
Related Documents
The Tektronix 4000 Series Digital Phosphor Oscilloscopes Service Manual,
part number 071-2137-XX, is available on the Tektronix Web site at
www.tektronix.com/manuals.
Tektronix 4000 Series Declassification and Security Instructions iii

Tektronix MSO4054 Specifications

General

Brand	Tektronix
Model	MSO4054
Category	Test Equipment
Language	English