Acquire the Signal
2. Connect the ground lead or leads to the circuit
ground.
You can connect a separate lead for each
channel or a common grou nd lead for each
group of 8 wires.
3. If needed, connect the appropriate grabber for
each probe to the probe tip.
4. Connect the each probe to the desired circuit
test point.
5. Push the D15 - D0 front panel button to display
the menu.
6. Push the lower-bezel D15 - D0 button to
access the D15 - D0 On or Off menu.
D15 – D0
On/Off
Thresholds Edit Labels MagniVu
On |Off
Height
S |ML
MSO4000 and DPO4000 Series Oscilloscopes User Manual 125
To Next Page
Loading...
Need help?
General
