General safety
summary
Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
To avoid damage to
equipment and personal
injury
Do not exceed rackmount weight ratings. Use this rackmount kit only for
RSA306B and RSA306 instruments and instrument controllers.
If you install an instrument controller in the area behind the mounted
instrument(s), weight and environmental restrictions apply.
In a static environment (such as an office or manufacturing facility), the total
additional weight should not exceed 5 lbs (2.27 kg).
In a dynamic environment (such as a truck or airplane), no additional w eight
should be added (no instrument controller(s) should be added).
Use proper hardware. Do not interchange hardware. Use only specified mounting
screws.
Use care when installing and removing product from rack. Avoid pinching
fingers and hands when installing and removing. Do not force the product when
insta
lling. Gently pull the product out when removing.
Use only with specified products. Do not use rackmount on products f or which
it was not intended. Refer to individual product manuals for details or contact
Tektronix Customer Service when in doubt.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tek.com to find contacts in your area.
www.tek.com
Copyright © Tektronix
*P075109400*
075-1094-00
To Next Page
Need help?
General
