Nonvolatile memory devices
The nonvolatile memory devices for the TBS1000B and TBS1000B-EDU
products are listed in the Nonvolatile memory devices container (TBS1000B &
TBS1000B-EDU) on page 5 section.
Flash
Type and size FLASH, 8 M X 8, 4 M X 16
Function Holds instrument firmware, current setup, saved setups, saved reference waveforms, hard copy
image files, and calibration constants
Type of user information
stored
Both user data and user settings
Method of modification Indirect
Data input method Factory configurations, firmware operations, user input, and USB disk upgrade
Location Main Acquisition board
User accessible No
To clear Perform the procedure Clear the flash memory.
Process to sanitize Perform the procedure Clear the flash memory.
EEPROM
Type and size EEPROM, SERIAL, 1 M
Function Program memory for the USB processor
Type of user information
stored
None
Method of modification Indirect
Data input method Factory configurations, USB disk upgrade
Location Main Acquisition board. TBS and TDS models only.
User accessible No
To clear Not applicable, does not contain user data or settings. Cleaning would disable instrument
functionality.
Process to sanitize Not applicable, does not contain user data or settings. Sanitizing would disable instrument
functionality.
Memory devices
4 Declassification and Security Instructions
To Next Page
Loading...
Need help?
General
