Tektronix TBS1202B Security Instructions

Preface
This document helps customers with data security concerns to sanitize or remove
memory devices from the listed products. These products have data storage
(memory) devices and data output devices (USB ports). These instructions tell
you how to clear or sanitize the memory devices, and also tell you how to
declassify an instrument that is not functioning.
Instrument code and calibration settings reside in nonvolatile flash memory.
Instrument setups and reference waveforms may also be stored in flash memory
or on USB drives connected to the instrument.
If you have any questions, contact the Tektronix Technical Support Center at
www.tektronix.com/support.
Reference
The procedures in this document are written to meet the requirements specified
in:
■
NISPOM, DoD 5220.22–M, Chapter 8
■
ISFO Process Manual for Certification & Accreditation of Classified Systems
under NISPOM
Products
The following Tektronix products are covered by this document:
■
TBS1000 Series. TBS1022, TBS1042, TBS1062, TBS1102, TBS1152
■
TBS1000B Series. TBS1032B ,TBS1052B, TBS1072B, TBS1102B,
TBS1152B, TBS1202B
■
TBS1000B-EDU Series. TBS1052B-EDU, TBS1072B-EDU, TBS1102B-
EDU, TBS1152B-EDU, TBS1202B-EDU
■
TDS1000B Series. TDS1001B, TDS1002B, TDS1012B
■
TDS2000B Series. TDS2002B, TDS2004B, TDS2012B, TDS2014B,
TDS2022B,TDS2024B
■
TDS1000C-EDU Series. TDS1001C-EDU, TDS1002C-EDU, TDS1012C-
EDU
■
TDS2000C-EDU Series. TDS2001C, TDS2002C, TDS2004C, TDS2012C,
TDS2014C, TDS2022C, TDS2024C
■
TPS2000B Series. TPS2012B, TPS2014B, TPS2024B
The TBS1032B is available only in North America and Europe.
Declassification and Security Instructions iii

Tektronix TBS1202B Specifications

General

Brand	Tektronix
Model	TBS1202B
Category	Test Equipment
Language	English