TDS Family Performance Verification and Specifications
vii
Preface
This is the Performance Verification and Specifications for the TDS 500B, 600B
and 700A Oscilloscopes. It contains procedures suitable for determining if each
instrument functions, was adjusted properly, and meets the performance
characteristics as warranted.
Also contained in this document are technical specifications for these oscillo-
scopes.
Related Manuals
The following documents are related to the use or service of the digitizing
oscilloscope:
H The TDS 520B, 540B, 620B, 644B, 680B, 684B, 724A, 744A, & 784A User
Manual (Tektronix part number 070-9383-XX).
H The TDS Family Programmer Manual (Tektronix part number
070-9556-XX) describes using a computer to control the digitizing oscillo-
scope through the GPIB interface.
H The TDS 520B, 540B, 620B, 644B, 680B, 684B, 724A, 744A, & 784A
Reference (Tektronix part number 070-9382-XX) gives you a quick overview
of how to operate your digitizing oscilloscope.
H The TDS 520B, 540B, 620B, 644B, 680B, 684B, 724A, 744A, & 784A
Service Manual (Tektronix part number 070-9386-XX) provides information
for maintaining and servicing the digitizing oscilloscope to the module level.
To Next Page
Loading...
Need help?
General
