Tektronix TDS1002 Programmer's Manual

Command Groups
TDS200/1000/2000 Series Oscilloscope Programmer Manual
2−17
Table 2−9: Cursor commands (Cont.)
Header Description
CURSor:HBArs:POSITION<x> Set/query position of a horizontal bar
cursor
CURSor:HBArs:UNIts? Query vertical scale units
CURSor:SELect:SOUrce Select waveform
CURSor:VBArs? Return vertical bar settings
CURSor:VBArs:DELTa? Return horizontal distance between
cursors
CURSor:VBArs:POSITION<x> Set/query position of a vertical bar cursor
CURSor:VBArs:UNIts Set/query vertical cursors to time or
frequency
Display Commands
Display commands let you change the graticule style, displayed
contrast, and alter other display attributes. Table 2-10 lists and
describes Display commands.
Table 2−10: Display commands
Header Description
DISplay? Returns display settings
DISplay:CONTRast Set/query the LCD display contrast
DISplay:FORMat Set/query YT or XY display
DISplay:INVert
1
Set/query normal or inverted display
DISplay:PERSistence Set/query the accumulate time
DISplay:STYle Set/query waveform display style
1
TDS1000 and TDS2000 series only.

Tektronix TDS1002 Specifications

General

Brand	Tektronix
Model	TDS1002
Category	Test Equipment
Language	English