Tektronix TDS2012 User Manual

Understanding Oscilloscope Functions
16
TDS1000/2000-Series Digital Oscilloscope User Manual
Position
The horizontal position control establishes the time between the
trigger and the screen center. Refer to Horizontal Scale and Position;
Pretrigger Information on page 19 for more information on how to
use this control to position the trigger.
Slope and Level
The Slope and Level controls hel p to define the trigger. The Slope
option (Edge trigger type only) determines whether the oscilloscope
finds the trigger point on the rising or the falling edge of a signal.
The TRIGGER LEVEL knob controls where on the edge the trigger
point occurs.
Rising edge
Falling edge
Trigger slope can be rising or falling
Trigger level can be
adjusted vertically

Tektronix TDS2012 Specifications

General

Brand	Tektronix
Model	TDS2012
Category	Test Equipment
Language	English