Tenda 4G03 User Manual

4
Ports & Buttons
ON/OFF PWR RST/WPS WAN/LAN LAN
Port/Button Description
ON/OFF
PWR
RST/WPS
WAN/LAN
LAN
Power button.
Used to turn on or off the router.
Power jack.
Used to connect to a power source to supply power for the router.
Used to reset the router, or start WPS negotiation of the router.
It can serve as a WAN port or a LAN port.
By default, the router is under 3G/4G router mode and it serves as a LAN port.
When the router is set to the wireless router mode, it serves as a WAN port.
It is a LAN port used to connect to wired devices, such as a computer.
When the IPTV function is enabled under the wireless router mode, it serves
as the IPTV port to connect to the set top box.
Antenna socket
Used to connect external antennas, which enhance the signal strength.
Reset: Hold down the button for about 8 seconds, and release it when all
LED indicators light off and then light up. The router is reset.
WPS: Press the button, and the Wi-Fi LED indicator blinks. Configure
WPS-enabled wireless devices within 2 minutes to start WPS negotiation
with the router.
Tips:
The router is equipped with internal antennas. External antennas are
not included in the packaging and need to be bought additionally.
Antenna sockets
ON/OFF PWR RST/WPS WAN/LAN LAN TEL

Tenda 4G03 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
4G standard	LTE-TDD & LTE-FDD
3G standards	WCDMA
Ethernet LAN (RJ-45) ports	2
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Product type	Tabletop router
Product color	White
LED indicators	LAN, LTE, Link, Power, WLAN
Transmit power	20 dBmW
Antennas quantity	4
Output current	1 A
Output voltage	9 V
AC input voltage	100 - 240 V
Power source type	AC, DC
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Cables included	LAN (RJ-45)
Sustainability certificates	CE, RoHS
Number of products included	1 pc(s)
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	60 mm
Width	126 mm
Height	185 mm
Weight	280 g