EasyManuals Logo
Home>Tenda>Extender>A33

Tenda A33 Quick Installation Guide

Tenda A33
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
Before performing an operation, read the operation instructions and precautions to be taken, and follow them to prevent
accidents. The warning and danger items in other documents do not cover all the safety precautions that must be followed.
They are only supplementary information, the installation and maintenance personnel need to understand the basic safety
precautions to be taken.
1. Do not use this apparatus near water.
2.Clean only with dry cloth.
3.Do not block any ventilation openings, such as newspapers, table-cloth, curtains, etc.
4.Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus that produce heat.
5.Do not damage the ground conductor or operate the device in the absence of well installed ground conductor. Conduct
the appropriate electrical inspection.
6.Protect the power cord from being walk on or pinched particularly at the plugs, convenience receptacles and at the point
where they exit from the apparatus.
7. Only use attachments/accessories specified by the manufacturer.
8.Unplug this apparatus during lighting storms or when unused for long periods of time.
9.Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
10.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
11.Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall
not be exposed to dripping or splashing.
12.Warning: To reduce the risk of electric shock, do not remove cover as there no user-serviceable parts inside. Refer
servicing to qualified personnel.
Safety Precautions

Other manuals for Tenda A33

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda A33 and is the answer not in the manual?

Tenda A33 Specifications

General IconGeneral
Maximum data transfer rate1000 Mbit/s
Antennas quantity2
Antenna gain level (max)5 dBi
Wi-FiYes
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Frequency band5/2.4 GHz
Signal strength20 dBm
Top Wi-Fi standardWi-Fi 6 (802.11ax)
WLAN data transfer rate (max)2402 Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Connectivity technologyWired & Wireless
Ethernet LAN (RJ-45) ports1
Security algorithmsWPA-PSK, WPA2-PSK, WPA3
Power LEDNo
Product typeNetwork repeater
Product colorWhite
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Sustainability certificatesCE, RoHS
CertificationFCC
DC output current1 A
DC output voltage12 V
Power consumption (typical)11 W
Weight and Dimensions IconWeight and Dimensions
Depth72 mm
Width123 mm
Height47.5 mm

Related product manuals