4 . Customize your WiFi name (SSID), WiFi password and the login
password as needed, and click Next.
Done.
Tips
WiFi Settings
Tenda_XXXXXX
WiFi password of 8-32 characters
Not Required
Set the WiFi password as the login password of the
admin account.
Not Required
Login password of 5-32 characters
Next
You’re all set! You can now connect to
Tenda_XXXXXX
To change settings of other features,click the "More" button below.
More
LED indicators
LED indicator
SYS
Status Description
Solid on
Blinking
O
WAN
LAN
WiFi
T
Solid on
Blinking
O
Solid on
Fast blinking
for twice
O
Solid on
Fast blinking
Slow blinking
O
The router works properly, but fails to connect to
the internet.
The system is faulty.
The WAN port is connected properly, but no data
is being transmitted
Data is being transmitted over the WAN port.
The WAN port is disconnected or improperly
connected.
At least one LAN port is connected properly.
A new wired device is connected to the router.
No device is connected to any LAN port of the
router properly.
At least the 2.4 GHz or 5 GHz WiFi network is enabled.
Data is being transmitted wirelessly.
The router is performing WPS negotiation.
Both 2.4 GHz and 5 GHz WiFi networks are disabled.
This LED is reserved.
The router is starting.
If the indicator still lights solid on after the router
completes startup, it indicates that the router is
connecting to the internet successfully.
IV. Access the internet
WiFi-enabled devices: Connect your WiFi-enabled devices to the WiFi
network of the router using the WiFi name and WiFi password you set.
The By default, the WiFi name for both 2.4 GHz and 5 GHz are the same, if you need to
modify the WiFi name and WiFi password, see Q4 in FAQ.
Wired devices: Your wired devices connected to the router can access
the internet directly now.
The WiFi password is used to connect to the WiFi network, and the login password
is used to log in to the web UI of the router.
Note
English
03
To Next Page
Loading...
Need help?
General
Weight and Dimensions
