Tenda HG9 User Manual

1. Connect and register the ONT
Tips:
If ISP offers you parameters, you need to use them to manually register the ONT.
DO NOT look directly at the PON port when the device is powered on, as well as the terminal of the indoor
fiber cord, to prevent any harm to your eyes.
Connect the ONT as shown in the figure. Wait until the PON LED indicator lights solid on, then the ONT
is registered successfully.
Caution, laser
Method:
➊ Use an Ethernet cable to connect a LAN port of the ONT to a computer, or connect your
smartphone to the Wi-Fi network of the ONT using the SSID (Wi-Fi name) and Key (Wi-Fi password)
on the bottom label.
➋ Enter 192.168.1.1 in a web browser and log in to the web UI of the ONT (default login user name
and password are both admin).
➌ Navigate to Admin > GPON Settings (or EPON Settings) and enter the parameters provided by
your ISP.
Power
adapter
Press to turn
on the device ONT
Fiber cord
➋
➊
➌
3

Tenda HG9 Specifications

General

ITU standards	G.984.1, G.984.2, G.984.3, G.984.4
Networking standards	IEEE 802.1Q, IEEE 802.3u, IEEE 802.3z
Transmission distance (max)	20 km
Wi-Fi	Yes
Antennas quantity	2
Antenna gain level (max)	6 dBi
Fiber ports quantity	1
Fiber optic connector	SC
Ethernet LAN (RJ-45) ports	4
Product type	Optical network terminal (ONT)
Product color	White
Power consumption (typical)	18 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	124.9 mm
Width	190 mm
Height	26.5 mm