EasyManuals Logo
Home>TermaTech>Wood stove>TT21R

TermaTech TT21R User And Mounting Manual

Default Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
UK
User and mounting manual
Please read also:
SUPPLEMENTARY INSTALLATION INSTRUCTIONS FOR
THE UK MARKET (last 6 pages)
CE approved according to:
EN13240
NS3058+NS3059
Congratulations on your new wood-burning stove.
We thank you for choosing a TermaTech wood-burning stove and wish you many cosy and warm
moments in the future.
Before using the stove you should read the user and mounting manual and also the SUPPLEMEN-
TARY INSTALLATION INSTRUCTIONS FOR THE UK MARKET (last 6 pages of this manual) so you
are familiar with the legal requirements as well as the instructions regarding maintenance. By this
it is ensured that the product works as it is intended and you get the most out of your investment
for many years to come.
Installation/user instruction.................................. Page 25
Installation instructions in ”smoke control areas”.. Page 27
Lighting instruction................................................ Page 27
Maintenance........................................................... Page 28
Warranty/right to invoke lack of conformity.......... Page 29
Hints...................................................................... Page 29
Remedy of malfunctions / FAQ............................... Page 30
Technical speci cations.......................................... Page 31
Supplementary Inst. Instructions UK..................... Page 32
Drawing concerning smoke control kit.................... Page 36
INSTALLATION INSTRUCTION
The stove is intended for intermittent combustion. It is not meant to “heat over” at night. By fol-
lowing the instruction below in “Lighting instructions” the best and most environmentally friendly
combustion is achieved.
The wood-burning stove is delivered ready for mounting (the exhaust branch may need to be
screwed on) and must be connected to the chimney with a smoke pipe. The connection between
stove and chimney must, as far as possible, be mounted in one straight piece (with as few bends
as possible) and as minimum horizontally, but preferably rising from the stove to the chimney.
Joints must be tight. Remember that it has to be possible to clean the pipe (possibly with a clea-
ning hatch on the pipe).
The Wood Compartment
The wood compartment must only be used, if the front is open (No door in wood compartment).
If the stove is  tted with a door, don´t store  ammable material as wood, ingniters, or lighters in
the wood compartment.
Any unauthorised changes to the wood-burning stove will be viewed as a structural change and
thereby the warranty will be void and is also a risk to safety.
In the door on your TT stove there is a spring that makes the door close by itself when you let go
of the handle.
This closing device is not a demand in the UK, Denmark and many other countries and can the-
refore be removed. In the bottom hinge the split with lentil head is removed which removes the
tension from the spring. This is most easily done by using a small screw driver and side-cutting
pliers.
The covering plate for the grate
Together with your stove there is a square cover plate. Place the coverplate on the top of the
grate with the taps down in the grate.
The cover plate secure a optimal burning with the ash and the heat as long as possible in the
burning chamber.
Some cover plate have 4 pins you have to set down into the grate, to be sure there is a distance
between the grate and cover plate.

Other manuals for TermaTech TT21R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TermaTech TT21R and is the answer not in the manual?

TermaTech TT21R Specifications

General IconGeneral
BrandTermaTech
ModelTT21R
CategoryWood stove
LanguageEnglish

Related product manuals