Copyright © Houghton Mifflin Company. All rights reserved. B-1
PART B
TEXAS INSTRUMENTS TI-85/TI-86 GRAPHING
CALCULATORS
Setup
When using this Guide, you should always, unless instructed otherwise, use the calculator setup
specified below for both the TI-85 and TI-86. Before you begin, check the basic setup with
2nd MORE (MODE) . Use the following instructions to choose the settings shown in Figure 1. Check
the window format with GRAPH MORE F3 (FORMT) . Choose the settings shown in Figure 2.
¥ If you do not have the darkened choices shown in Figures 1 and 2 (below), use the arrow
keys to move the blinking cursor over the setting you want to choose and press ENTER .
¥ Press EXIT or 2nd EXIT (QUIT) to return to the home screen.
TI-85, 86 Basic Setup TI-85, 86 Window Setup
FIGURE 1 FIGURE 2
For the TI-85 Return to the home screen with EXIT or 2nd EXIT (QUIT) . Specify the statistical
setup as shown in Figure 3 by pressing 2nd – (LIST) F1 ({) 0
F2 (}) STO
‹
7 (L) ALPHA 1 ENTER 2nd ENTER (ENTRY) 2 ENTER . (See
Figure 3.) Press EXIT or 2nd EXIT (QUIT) to return to the home screen.
For the TI-86 Return to the home screen with EXIT or 2nd EXIT (QUIT) . Specify the statistical
setup as shown in Figure 6 by pressing
2nd – (LIST) F5 (OPS) MORE MORE MORE F3 (SetLE) ALPHA 7 (L) 1
,
To Next Page
Need help?
General
