Care and Maintenance | 52 |
Cleaning Recommendations
PART/MATERIAL CLEANING NOTES
Brass Burner Base and Cast Iron Cap • A stiff nylon bristle tooth brush can be used to clean port openings.
• After cleaning, make sure that the STAR
®
burner cap is correctly seated
on the STAR burner base.
• DO NOT scratch or gouge the port openings of burner cap.
• Suggested cleaners; rinse and dry immediately
-- Hot water and detergent
-- Bon-ami
®
-- Cameo
®
Aluminum and Stainless Steel Cleaner
-- Wright's
®
All Purpose Brass Polish
-- Kleen King
®
Igniters
Ceramic
• DO NOT use sharp tools to scrape the igniters. The igniters are fragile. If
an igniter is damaged, it may not light the burner.
• Suggested cleaners:
-- Cotton swab dampened with soapy water
-- Fantastik
®
Control Knobs / Metal
Bezels / Chrome
• DO NOT soak knobs.
• DO NOT force knobs onto wrong valve shaft.
• Suggested cleaners; rinse and dry immediately:
-- Hot water and detergent
Exterior Finish / Backguard
Stainless Steel
• Stainless steel resists most food stains and pit marks providing the
surface is kept clean and protected. Never allow food stains or salt to
remain on stainless steel for any length of time.
• Rub lightly in the direction of polish lines.
• Chlorine or chlorine compounds in some cleaners are corrosive to
stainless steel. Check ingredients on label.
• Suggested cleaners; rinse and dry immediately:
-- Hot water and detergent
-- Fantastik
®
-- Siege
®
Stainless Steel and Aluminum Cleaner
-- Kleen King
®
Stainless Steel Liquid Cleaner
-- THERMADOR Stainless Steel Conditioner (00576697) to protect the
finish from staining and pitting; enhances appearance.
-- For hard water spots use household vinegar.
• For heat discoloration; rinse and dry immediately:
-- Cameo
®
-- Barkeepers Friend
®
-- Zud
®
-- Wright's
®
All Purpose Brass Polish
To Next Page
Loading...
Need help?
General