19
Installation manual: Use
3.2. Parameter table:
2QO\WKHDQGSDUDPHWHUVPD\EHPRGLÀHG
Num Setting range Default setting
00
Temperature setpoint
in cooling mode
8 => 28 °C 12 °C
01 Temperature setpoint in heating mode
15 =>&
28 °C
02 2SHUDWLQJWLPHEHIRUHWKHGHIURVWLQJF\FOHVWDUWV - PLQV
Evaporator temperature activating the defrosting cycle -
&
"-" is not displayed
Evaporator temperature deactivating the defrosting
cycle
-
13 °C
05 Defrosting time - 8 mins
Number of compressors in the system -
1
Restart after power outage -
1 (yes)
08
2SHUDWLQJW\SH
+HDWLQJDQGFRROLQJ1
-
1
09
2SHUDWLQJPRGH
&LUFXODWLRQSXPSDOZD\VUXQQLQJ
-0
10 Temperature setpoint in auto mode
8 =>&
28 °C
11
([SDQVLRQYDOYHPDQDJHPHQWDXWR1)
-
1
12 2YHUKHDWLQJWDUJHW - 5° C
Expansion valve manual setting in cooling mode -
Expansion valve manual setting in heating mode -
3.3. Default display:
,QVWDQGE\PRGHRXWGRRUWHPSHUDWXUHDQGWLPH
,QRSHUDWLRQZDWHULQOHWDQGRXWOHWWHPSHUDWXUHVDQGWLPH
7LPHVHWWLQJ
• Press and hold
SET
IRUVHFRQGVXQWLOWKHKRXUVVWDUWWRÁDVK
• Set the hours using the
and buttons.
• Press
SET
• Set the minutes using the
and buttons.
• Press
SET
WRFRQÀUP