Icon is on, step count can be saved. When Step Count Icon is on, it means the bottom line of data is step
counts. If there is a rest, the user needs to walk at least 15 steps before step count updates on the display. If
the rest is longer than 3 minutes, the watch will go into a power saving status.
2．In Normal Time Mode, press D Pusher once to view steps, calories, distance, speed, the last history data. The
current time and date will be kept the same, and shows steps, calories, distance, speed data at the bottom side.
3．During History Mode, press C Pusher to view the step counting data for last 7 days. The top line will display
the history date. For the same date, their saved steps, calorie and distance data will be displayed and
switching the screen one by one automatically.
4．In Normal Time Mode, long press B Pusher for 3 seconds to delete the current motion data.
Time, Date and Profile Settings
1. Press and hold A Pusher for 3 seconds to set the time and date.
2. After entering the setting state, the value indicating "second" is flashing, and the flashing value indicates that it
has been selected.
3. As for the setting of seconds, you cannot set the period to increase or decrease. When seconds are selected,
press D Pusher, and the second value will return to zero. When the second value is less than or equal to 30
seconds, the second returns to zero and the minute value remains unchanged. When the second value is greater
than or equal to 31 seconds, the second value will return to zero and the score will be increased by "1".
4. In the setting state, press D Pusher, the selected value will be adjusted incrementally, and hold D Pusher can be
adjusted rapidly incrementally.
5. In the setting state, press A Pusher or no Pusher operation within 60 seconds, the settings will be confirmed and
return to the Normal Time Mode.
Alarm and hourly chime in the Alarm Mode
1．In Normal Time Mode, press B Pusher to enter the Alarm Mode.
2．Press C Pusher once to switch between Alarm 1 and Alarm 2.
3．Press D Pusher once to toggle among Alarm and Hourly Chime is off, Alarm is on, Hourly Chime is on, Alarm
and Hourly Chime is on 4 different states.
Setting of Alarm and Snooze
Minute Setting Hour Setting Snooze Setting
1．Press and hold A Pusher for 3 seconds to enter the Alarm Time Setting.
2．During the setting state, the value indicating "minute" is flashing, and the flashing value indicates that it has
been selected.
3．In the setting state, press D Pusher, the selected value will be adjusted incrementally, and hold D Pusher can
be adjusted rapidly incrementally.
4．In the setting state, press A Pusher or no Pusher operation within 60 seconds, the settings will be confirmed
and return to the Normal Time Mode.
5．When the snooze function is turned on by the current alarm. During the alarm, the snooze function is activated
without any Pusher operation. After 5 minutes, the alarm will ring again. The same situation will be repeated
five times.
Stopwatch Mode
To Next Page
Loading...
Need help?
General
