(1) The altitude is displayed in metres or feet depending on
the units selection (see "Selecting the units" on page 8).
After 30 seconds, the hands show the time again
but the digital display remains in ALTIMETER mode.
After 10 h, the digital display returns to "h-m-s" mode
(2) The adjustment shows the altimeter setting at the value
of the actual altitude. For more information,
see the explanation of the altimeter on page 22.
Validation of the setting
(2)
Activation of the crystal
Adjusting the altitude
Activation of the altimeter function
Incrementation or
decrementation (1 m or 3 ft)
(1)
+ or - 1 step
1"
2"