TomTom Navigator Navigator 3 User Manual

Introduction
Thank you for purchasing TomTom Navigator as your navigation system. This Quick Start
Guide contains basic instructions for using TomTom Navigator. This guide is to be used after
the software has been installed on your Pocket PC and the GPS receiver has been connected.
If necessary, refer to one of the other two documents that have been supplied:
Installation poster
The poster contains procedures for mounting and cabling the hardware,
and installing the software, to make the system ready for first use.
User guide
This guide is provided on the CD-ROM and contains detailed
instructions on using TomTom Navigator. For custom installation, refer
to this guide.
Refer to www.tomtom.com for the latest information.
Chapter 1
Launching Navigator for the first time
The GPS receiver is connected, and the TomTom Navigator software has been installed. Tap
TomTom Navigator on the Pocket PC’s start-up screen. The first time you do this, it will
start the installation wizard that will guide you through the configuration of TomTom
Navigator. After that, tapping
will start TomTom Navigator.

TomTom Navigator Navigator 3 Specifications

General

Brand	TomTom
Model	Navigator Navigator 3
Category	GPS
Language	English