bedknife and reel wear will accelerate. Uneven
wear can result, adversely affecting quality of
cut.
Note: As the reel blades run against the bedknife, a
slight burr will appear on the front cutting edge
surface over the full length of the bedknife.
Occasionally running a file across the front edge to
remove this burr will improve cutting.
After extended running, a ridge will eventually develop
at both ends of the bedknife. These must be rounded off
or filed flush with the cutting edge of bedknife to assure
smooth operation.
Operation
21
To Next Page
Loading...
Need help?
General
