8
Setup
Note: Determine the left and right sides of the machine from the normal operating position.
Loose Parts
Note: Use this chart as a checklist to ensure that all parts necessary for assembly have been shipped. If any of these parts are
missing, total setup cannot be completed.
Description
Qty. Use
Steering wheel
Roll pin, 1/4 x 2 in.
1
1
Mounting the steering wheel
Capscrew, 5/16 x 5/8 in.
Locknut, 5/16 in.
2
2
Securing the battery cables to the battery
Capscrew, 1/2 x 1-1/4 in.
Washer, 1/2 in.
4
4
Attaching the implements to the frame
Cylinder pin
Cotter pin
1
2
Attaching the cylinder to the implement
Decal 2 Affix on machine, if desired.
Key
Parts catalog
2
1
Operator’s Manual
Engine Operator’s Manual
1
1
Read before operating the machine.
Operator Training Material
Registration card 1 Fill out and return to Toro.
Note: Specifications and design subject to change without notice.
To Next Page
Loading...
Need help?
General
