Toro 824 Power Shift User Manual

GB–1
Contents
Page
Introduction 1.
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Operating 2 . . . . . . . . . . . . . . . . . . . .
While Operating 3 . . . . . . . . . . . . . . . . . . . . .
Maintaining Snowthrower 4 . . . . . . . . . . . . .
Sound Pressure Level 4 . . . . . . . . . . . . . . . . .
Sound Power Level 4 . . . . . . . . . . . . . . . . . .
Vibration Level 4 . . . . . . . . . . . . . . . . . . . . .
Symbol Glossary 6 . . . . . . . . . . . . . . . . . . . .
Loose Parts 10 . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories 10 . . . . . . . . . . . . . . . . . . . . . . . . .
Assembly 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mount Auger/impeller Housing 11 . . . . . . . . .
Install Shift Rod (Fig. 5) 11 . . . . . . . . . . . . . .
Install Discharge Chute (Fig. 6) 11 . . . . . . . . .
Install Chute Control Gear (Fig. 7) 12 . . . . . .
Check Tire Pressure 12 . . . . . . . . . . . . . . . . . .
Install Skids 12 . . . . . . . . . . . . . . . . . . . . . . . .
Check Auger Gear Box Oil 12 . . . . . . . . . . . .
Before Starting 13 . . . . . . . . . . . . . . . . . . . . . . . . . .
Fill Crankcase With Oil 13 . . . . . . . . . . . . . . .
Fill Fuel Tank W ith Gasoline 13 . . . . . . . . . . .
Operation 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Controls 14 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting/Stopping Engine 15 . . . . . . . . . . . . . .
Power Shift Operation 16 . . . . . . . . . . . . . . . .
Free Wheeling Or Self-propelled Drive 16 . . .
Operating Tips 16 . . . . . . . . . . . . . . . . . . . . . .
Adjusting Scraper (Fig. 8) 17 . . . . . . . . . . . . .
Adjusting Skids (Fig. 9) 17 . . . . . . . . . . . . . . .
Adjusting Headlight 18 . . . . . . . . . . . . . . . . . .
Maintenance 18 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Draining Gasoline 18 . . . . . . . . . . . . . . . . . . .
Lubricating Snowthrower 19 . . . . . . . . . . . . .
Changing Crankcase Oil 19 . . . . . . . . . . . . . .
Auger Gear Box Oil 19 . . . . . . . . . . . . . . . . . .
Adjusting Auger/Impeller Drive Belt 19 . . . .
Adjusting Traction Drive Belt (Fig. 26) 20 . . .
Replacing Drive Belts (Fig. 28) 20 . . . . . . . . .
Adjusting Drive Chain (Fig. 29-31) 21 . . . . . .
Adjusting Carburetor 21 . . . . . . . . . . . . . . . . .
Replacing Spark Plug 23 . . . . . . . . . . . . . . . . .
Storage 23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction
Thank you for purchasing a Toro product.
All of us at Toro want you to be completely satisfied
with your new product, so feel free to contact your
local Authorized Service Dealer for help with service,
genuine Toro parts, or other information you may
require.
Whenever you contact your Authorized Service
Dealer or the factory, always know the model and
serial numbers of your product. These numbers will
help the Service Dealer or Service Representative
provide exact information about your specific
product. You will find the model and serial number
decal located in a unique place on the product
(Fig. 1).
For your convenience, write the product model and
serial numbers in the space below.
Model No.
Serial No.
Read this manual carefully to learn how to operate
and maintain your product correctly. Reading this
manual will help you and others avoid personal injury
and damage to the product. Although Toro designs,
produces and markets safe, state-of-the-art products,
you are responsible for using the product properly
and safely. You are also responsible for training
persons who you allow to use the product about safe
operation.

Toro 824 Power Shift Specifications

General

Brand	Toro
Model	824 Power Shift
Category	Snow Blower
Language	English