Toro SnowMaster 724 ZXR 36001 User Manual

Maintenance
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Afterthersthour
•Checkforloosefastenersandtightenthemifnecessary.
Aftertherst2hours
•Changetheengineoil.
•Inspecttheaugercableandadjustitifnecessary.
•Inspectthetransmissioncableandadjustitifnecessary.
Beforeeachuseordaily
•Checktheengineoillevelandaddoilifnecessary.
Every100hours
•Replacethesparkplug.
Yearly
•Checktheskidsandadjustthemifnecessary.
•InspectthethrowingedgesandhaveanAuthorizedServiceDealerreplacethe
throwingedgesandscraperifnecessary.
•Changetheengineoil.
•Inspecttheaugercableandadjustitifnecessary.
•Inspectthetransmissioncableandadjustitifnecessary.
•Checkthetirepressure.
•Checkforloosefastenersandtightenthemifnecessary.
•HaveanAuthorizedServiceDealerinspectthedrivebeltandreplaceitifnecessary.
Yearlyorbeforestorage
•Preparethemachineforstorage.
MaintenanceSafety
Readthefollowingsafetyprecautionsbeforeperformingany
maintenanceonthemachine:
•Beforeperforminganymaintenance,service,or
adjustment,stoptheengineandremovethekey.Ifmajor
repairsareeverneeded,contactanAuthorizedService
Dealer.
•Checkallfastenersatfrequentintervalsforproper
tightnesstobesurethemachineisinsafeworking
condition.
•Maintainorreplacesafetyandinstructionlabels,as
necessary.
•Donotchangethegovernorsettingsontheengine.
•PurchaseonlygenuineTororeplacementpartsand
accessories.
CheckingtheEngineOilLevel
ServiceInterval:Beforeeachuseordaily
1.Removethedipstick,wipeitclean,thenfullyinsertthe
dipstickwithoutthreadingitin.
2.Removethedipstickandchecktheoillevel.
•IftheoillevelisbelowtheAddmarkonthe
dipstick(Figure14),addoil.Referto3Fillingthe
EnginewithOil(page5).
•IftheoillevelabovetheFullmark(),drainthe
excessoiluntiltheoillevelisattheFullmarkon
thedipstick;referto3FillingtheEnginewithOil
(page5).
Figure14
1.Lowoillevel—addoil
2.Correctoillevel
12

Toro SnowMaster 724 ZXR 36001 Specifications

General

Brand	Toro
Model	SnowMaster 724 ZXR 36001
Category	Snow Blower
Language	English

Summary

Introduction to SnowMaster 724 ZXR Snowthrower

Safety Guidelines for Snowthrower Operation

Safety and Instructional Decals

Setup Procedures for Snowthrower

Unfolding the Handle

Instructions for unfolding the handle of the snowthrower, ensuring cables are not pinched.

Installing the Discharge Chute

Procedure for installing the discharge chute using a bolt and lock nut.

Filling the Engine with Oil

Guidance on checking and adding engine oil, including oil type and viscosity recommendations.

Checking the Tire Pressure

Instructions for adjusting tire pressure to the recommended level for safe operation.

Product Overview

Snowthrower Operation

Before Operation Safety

Essential safety checks and precautions to take before starting the snowthrower.

Filling the Fuel Tank

Recommended fuel types and procedures for safely filling the fuel tank.

Checking the Engine-Oil Level

Procedure for checking the engine oil level to ensure proper lubrication.

During Operation Safety

Critical safety practices to follow while operating the snowthrower.

Starting the Engine

Step-by-step guide on how to properly start the snowthrower engine.

Engaging the Auger

How to engage the auger for snow clearing.

Disengaging the Auger

Instructions on how to disengage the auger.

Self-Propelling the Machine

How to operate the self-propel drive for easier movement.

Stopping the Engine

Procedure for safely stopping the snowthrower engine.

Adjusting the Discharge Chute and Chute Deflector

How to adjust the direction and angle of snow discharge.

Clearing a Clogged Discharge Chute

Safe methods for clearing a clogged discharge chute.

Operating Tips

General advice and best practices for operating the snowthrower.

After Operation Safety

Safety precautions to follow after completing snowthrower operation.

Preventing Freeze-up after Use

Steps to take after use to prevent freezing of moving parts.

Maintenance Procedures

Recommended Maintenance Schedule

Overview of recommended maintenance tasks and their service intervals.

Maintenance Safety

Crucial safety precautions to observe before performing any maintenance.

Checking the Engine Oil Level

Detailed steps for checking the engine oil level.

Checking and Adjusting the Skids

Procedure to check and adjust skids for proper auger clearance.

Inspecting the Throwing Edges

Guidance on inspecting throwing edges for wear and replacement.

Changing the Engine Oil

Step-by-step instructions for changing the engine oil.

Replacing the Spark Plug

Procedure for safely removing and replacing the spark plug.

Adjusting the Auger Cable

How to adjust the auger cable for proper belt tension.

Adjusting the Transmission Cable

Procedure to adjust the transmission cable for drive engagement.

Checking the Tire Pressure

Ensuring correct tire pressure for optimal performance.

Storage of the Snowthrower

Storing the Snowthrower

Detailed instructions for preparing and storing the snowthrower for the off-season.