Toro TEMPUS DC LCD User Manual

4
Toro TEMPUS DC LCD Controller 1
_
2
_
4
_
6
WIRING
STEP 1
+S- C P 1 2 3 4 5 6 C
2. You can connect on the P output a master valve. The output will automatically
start 2s before each station and during the watering of each stations.
+S- C P 1 2 3 4 5 6 C
3. (Option) If you want to install a rain sensor, cut the yellow wire of the TEMPUS DC
LCD and connect it to the sensor.
The rain sensor when it is connected instead of the yellow wire (see wiring step
for each model) aects all the 4 programs. If it rains and the rain sensor is active,
programs A or B or C or D will not start. It is necessary to wait until the probe has
dried to see the programs restart. The manual control «All stations» does not take
into account the condition of the rain sensor.
+S- C P 1 2 3 4 5 6 C
1. Connect the TEMPUS DC LCD to the solenoids as described below.
Use 9VDC solenoid (latch type).
APP DOWNLOAD
1. On your smartphone or tablet, go to the «App Store» or to the «Play Store» app.
2. Search for «The Toro Company» in the search bar..
3. Once found, download the TEMPUS DC App.
Developer
The Toro Company
5. The features required for the Bluetooth® product to work:
- Smartphone or tablet running Android 4.3 or greater with Bluetooth Smart 4.0
or greater.
- Apple iPhone or iPad running iOS 9.0 or greater with Bluetooth Smart 4.0 or
greater
4. Once installed, activate the Bluetooth® of your smartphone or tablet.
STEP 2

Toro TEMPUS DC LCD Specifications

General

Brand	Toro
Model	TEMPUS DC LCD
Category	Controller
Language	English