USING THE LOCK MENU
The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER and CHANGE PASSWORD functions.
You can use these functions after entering the correct PASSWORD. (This password is the same one selected under "SETTING
V-CHIP".)
LOCKING CHANNELS
With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting.
You can choose to lock up to nine TV channels and nine cable channels.
Use the Channel Number Buttons (0-9)
to display the television channel you wish
to lock.
Press MENU, then press SET + or - until
the indicator next to "LOCK" begins to
flash. Then press ENTER.
" ,LOCK
- • CH LOCK
'I'VIDEO LOCK
I GAME
TIMER
I CHANGE PASSWORD
(+I-fENTER/MENU)
Use the Channel Number buttons (0-9) to enter your password,
then press ENTER.
The LOCK menu appears.
@]
Press SET + or - until the indicator next to "CH LOCK"
begins to flash, then press ENTER.
[§]
Press SET + or - to select:
• INPUT to select the channel as one to
be locked. Then press ENTER.
• ALL CLEAR to clear all channels from
the list of locked channels. Then press
.AlLCLEAR
ENTER
("-IENTERIMENU)
LOCKING VIDEO INPUT
With the VIDEO LOCK feature, you can lock out the input
source (VIDEO) and channel 3 and 4.
You will not be able to select the input sources with the
TVI
VIDEO button or Channel buttons unless you clear the setting.
OJ
Press MENU, then press SET + or -
VIDEO LOCK
until the indicator next to "LOCK" begins ~
OFF
to flash, then press ENTER.
VIDEO
VIDEO.
CH LOCK
CABLE
IINPUT
Use the Channel Number buttons (0-9) to
enter your password, then press ENTER.
The LOCK menu appears.
Press SET + or - until the indicator next to "VIDEO LOCK"
begins to flash, then press ENTER.
(+/-/
ENTER! MENU)
Press SET + or - to select:
• OFF: Unlocks all video input sources.
• VIDEO: Locks VIDEO.
• VIDEO +: Locks VIDEO, channel 3 and channel 4.
This option should be used if you use the antenna
to playa video tape.
[§]
Repeat steps 1 through 5 to lock other channels. When you
are finished locking channels, press MENU repeatedly until
the MENU screen is cleared. -
If you try to tune a locked channel, the TV will not display it, but will
display the nearest unblocked channel.
NOTES:
• If you are accessing the LOCK menus or V-chip menus for the
first time, choose a four-digit number to be your password.
• After programming CH LOCK, change channels before turning
off the television.
• If you want to unlock channels, select ALL CLEAR on step 5,
then press ENTER.
SETTING THE GAME TIMER
With the GAME TIMER feature, you can automatically activate
the VIDEO LOCK feature (VIDEO setting) to set a time limit for
playing a TV game (30, 60, or 90 minutes).
Press MENU, then press SET + or - until
the indicator next to "LOCK" begins
to flash, then press ENTER.
Use the Channel Number buttons (0-9)
to enter your password, then press ENTER.
The LOCK menu appears.
Press SET + or - until the indicator next to "GAME
TIMER" begins to flash, then press ENTER.
GAME nt.-1ER
III>
OFF
'"
60
90
«
I-I ENTER
I
MENU>
Press SET + or - to select a time limit (30 minutes, 60 minutes,
90 minutes or OFF).
Press MENU repeatedly until the MENU screen is cleared.
After the GAMETIMER is programmed, the display will appear
briefly every ten minutes to remind you that the GAME TIMER
is operating. When the programmed end time is reached, the
display will change the last channel automatically.
[§]
Press MENU to return to normal viewing.
STEREO AND SECOND AUDIO PROGRAM (SAP)
The TV is equipped with a feature known as Multi-channel TV
Sound or MTS. MTS broadcasts greatly enhance TV viewing
by bringing you programs with high fidelity stereo sound.
MTS also provides an extra channel called the Second
Audio Program or SAP which broadcasters can use to
transmit a second language for bilingual transmission or for
other purposes.
LISTENING TO STEREO SOUND
When the TV is turned on or a channel selection is made,
the word "STEREO" appears on the screen. This means
that "Stereo" broadcasting is received. When enjoy stereo
sound from the left and right speakers.
• When "Mono" broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear stereo
sound is not available, press MTS to change to mono
sound. The noise should be eliminated. Press it again to
return to stereo sound.
LISTENING TO SAP (SECOND AUDIO PROGRAM)
When the TV is turned on or a channel selection is made,
the letters "SAP" appear on the screen when Second Audio
Program broadcasting is received.
TO SELECT DESIRED SOUND
Press MTS to select the desired sound.
STEREO+SAP BROADCASTING
[I
MAIN SOUND
----.
SAP SOUND
(STEREO)
+
MAIN SOUND
+--
MAIN
+
SAP SOUND
(MONO) (MONO)
11
To Next Page
Loading...
Need help?
General
