31
Advanced playback
Press / / / to view a different part of the
frame.
You may move the frame from the
center position to UP, DOWN, LEFT
or RIGHT direction.
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
Press JUMP during playback or stop mode.
• “Time” only works in playback or
resume stop mode.
Press
or to select the “Time”, “Title” or
“Chapter”.
Press Number buttons (0–9) to change the
number.
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
1
DVD
VCD
CD
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
/6
/
/
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
/6
/
/
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
/6
/
/
12
/ / /
Zooming/Locating desired scene
ZOOM
CANCEL
0–9
ENTER
JUMP
DISPLAY
Advanced playback
Zooming
Press ZOOM during playback.
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM
1 (x 1.3), 2 (x 1.5) and 3
(x 2.0).
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
Notes:
•You can select the Pause, Slow or Search playback in the zoom
mode.
• Some discs may not respond to zoom feature.
Note:
In case of the Video-CD playback with PBC, the JUMP does not
work. To turn off PBC, see page
37
.
Locating desired scene
1
2
3
1
2
4
3
DVD
VCD
CD
Use the title, chapter and time recorded on the DVD disc to
locate the desired point to play back. In the case of VCD/CD
discs, time and track are used to locate the desired point to
play back.
To check the title, chapter and time, press DISPLAY.
5S00101B [E] (P28-31) 2/23/05, 5:39 PM31
To Next Page
Loading...
Need help?
General
